Electrical connection
,CAUTION: Before servicing, disconnect the power supply by either removing the fuse, shutting off the power main or manually "tripping" the circuit breaker.
Installation work and repairs should only be performed by a qualified technician in accordance with all applicable codes and standards. Repairs and service by unqualified persons could be dangerous and the manufacturer will not be held responsible.
Before connecting the appliance to the power supply, make sure that the voltage and frequency listed on the data plate correspond with the household electrical supply. This data must correspond to prevent machine damage. Consult an electrician if in doubt.
Only operate the appliance after it has been installed into cabinetry.
The plug must be plugged into an appropriate outlet that is installed and grounded in accordance with all local codes and ordinances.
Data plate
The silver data plate is located along the front side of the oven (door open).
Power supply
The oven comes equipped with a 7.2 ft. (2.2 m) power cord with a
NEMA
208 V, 20 A, 60 Hz power supply.
or
240 V, 20 A, 60 Hz power supply.
WARNING: THIS APPLIANCE MUST BE GROUNDED
Installer:
Please leave these instructions with the consumer.
71
