Operation
Entering the duration and delaying the start or the finish time
You can set the Start time and Finish to specify when you want cooking to start or finish.
To switch a programme on and off automatically you can either:
–Enter the Duration and Finish time, or
–Enter the Start time and the Duration. The time which has not been entered is calculated automatically.
The Start time will be shown in the display up until the heating elements are switched on.
During the course of the programme you can follow the Time left counting down in the display.
At the end of the programme the message "Prog. finished" will appear in the display and the buzzer will sound.
Changing or deleting an entered cooking time
^Touch the OK sensor.
^Use the ; or ? sensor to highlight the duration, start time or finish time and select it with the OK sensor.
^Use the ; or ? sensor to set the time to
If there is a power cut, all data entered will be deleted.
Making use of residual heat
The heating in the oven switches off shortly before the end of the cooking programme. The residual heat in the oven is sufficient to complete the cooking process.
Using the residual heat in the oven saves energy.
"Use residual heat" will appear in the display to show that the oven is in energy save mode. The current core temperature of the food will no longer be shown.
The cooling fan continues to run, as does the hot air fan if a "fan" setting has been chosen.
29
