|
| Problem solving guide |
|
| |
|
|
|
Problem | Possible cause and remedy | |
Browning is uneven. There will always be a slight unevenness. If browning is | ||
| very uneven, check | |
| with Fan plus U: | |
| – | whether the temperature was set too high, |
| – | whether the correct shelf level was used. |
| with Conventional heat V: | |
| – | the colour and material of the baking tins being used. |
|
| Light coloured, shiny, or thin walled tins are less suitable. |
| – | whether the correct shelf level was used. |
A fault code | You can rectify the following fault codes yourself: | |
appears in the | – | F 23: The pyrolytic temperature of approx. 460 °C was |
display. F + number | ||
|
| not reached. |
|
| This could have been caused by too much soiling in the |
|
| oven to start with. |
|
| Remove all coarse soiling before starting the pyrolytic |
|
| cleaning programme again. |
|
| If the fault message appears again please contact the |
|
| Miele Service Department. |
| – | F 32: The door has not locked for the pyrolytic cleaning |
|
| process. |
|
| Switch the oven off and start the pyrolytic cleaning |
|
| process again. |
|
| If the fault code appears again call the Miele Service |
|
| Department. |
| – | F 33: The door lock for the pyrolytic cleaning process will |
|
| not open. |
Interrupt the pyrolytic cleaning programme by switching the oven off. If the door lock will still not open please contact the Miele Service Department.
51
