Installation
Ventilation
Air at the back of the appliance gets warm. To ensure sufficient ventilation, the ventilation gaps must not be covered or blocked in any way. They should be dusted on a regular basis.
Appliances with wall spacers supplied
The wall spacers supplied with some appliances must be used in order to achieve declared energy consumption values. Appliance depth is increased by approx. 35
mmwith the wall spacers fitted. If the wall spacers are not used, this does not influence the functionality of the appliance. Energy consumption is only minimally increased if there is little distance between the appliance and the wall.
Installation
Remove the cable clip from the back of the appliance.
Check that all parts at the back of the appliance are unhindered. Carefully remove any hindrance.
Position the appliance with the wall spacers (if used) or the back close to the wall.
Aligning the appliance
To align the appliance, adjust the feet using the spanner supplied.
Levelling the appliance door
Fit the wall spacers onto the back of the appliance on the top left and right.
Ensure that you unscrew adjusting foot from the hinge plate until it sits on the floor. Then unscrew the foot by a further 90°.
40
