The correct temperature
Setting the temperature in the refrigerator section / freezer section
Use the two buttons underneath the respective temperature displays to set the temperature for the refrigerator and freezer sections.
Press the
+button: to raise the temperature (it gets warmer)
– button: | to reduce the temperature |
| (it gets cooler). |
The temperature being set will flash in the display.
When pressing the buttons, the following information shows in the display:
–When first pressed, the last temperature selected flashes.
–Each subsequent press of the button adjusts the temperature shown in
1 °C steps.
–Keeping the button pressed in adjusts the temperature continually.
Approx. 5 seconds after letting go of the button the current, average temperature of the refrigerator or freezer section is automatically shown.
If you have adjusted the temperature, wait for approx. 6 hours if the appliance is not very full and for approx. 24 hours if the appliance is full before checking the temperature
display, as it will take this long for the display to give an accurate reading. If, after this time, the temperature is still too high or too low, you will need to adjust it again.
Temperature range
The temperature can be adjusted:
–In the refrigerator section from 4 °C to 9 °C
–In the freezer section from
The ambient temperature in the room and the installation location can affect the time it takes for the appliance to reach the lowest temperature. If the ambient temperature is too high, the appliance may not reach the lowest temperature.
Setting the temperature in the PerfectFresh zone
The temperature in the PerfectFresh zone is automatically held at 0 to 3 °C. It can be raised or lowered, e.g. if you want to use it for storing items like fish.
^Press and hold the Super freeze button for approx. 5 seconds.
The Super freeze indicator light will start flashing, and a ; will flash in the temperature display.
18
