Miele KF 9757 ID Adjusting the interior fittings, Moving the shelves, Split shelf

Adjusting the interior fittings

Moving the shelves

The shelves can be adjusted according to the height of the food.

^Raise the shelf, and pull it forwards slightly until the notch at the side is in line with the shelf support. It can then be raised or lowered to the required level.

The raised edge at the back must face upwards to prevent food from touching the back of the appliance and freezing to it.

Stoppers prevent the shelves from being dislodged by mistake.

Split shelf

In order to accommodate tall items in the appliance, one of the shelves is divided. The front section can be pushed under the rear section.

^Push the rear half of the glass shelf up slightly from below.

^At the same time, pull the front half of the glass shelf forwards slightly and then push it carefully under the rear half.

To move the split shelf:

^Take both halves of the split glass shelf out,

^fit the two brackets onto the supports on either side at the required height,

^and push the glass shelves in one after the other. The shelf with the raised edge must be at the back.

PerfectFresh zone compartments

The compartments in the PerfectFresh zone are on telescopic rails, and can be removed for filling, emptying or cleaning purposes.

^Pull out the compartment as far as it will go, and then lift it up and out.

Push the runners back in again to avoid injury or damage.

28