Miele KF 9757 ID Building in the appliance, Weight of the furniture doors

Building in the appliance

All fitting instructions given are for a right hand hinged appliance. If you have converted the appliance to left hand hinging you will need to adapt these instructions accordingly.

To install the appliance you will need the following:

–a cross-slotted screwdriver,

–a selection of Torx screwdrivers,

–a hexagon spanner.

Weight of the furniture doors

Before fitting furniture doors, ensure that the weight of the door does not exceed the maximum permitted:

	max.	max.
	weight	weight
Appliance	of upper	of lower
	door in	door in
	kg	kg
KF 9757 iD	20	12

Building into a peninsular run

When built into a peninsular run, the rear of the building-in niche must be fitted with a kitchen furniture panel.

Aligning the housing unit

The housing unit must be carefully aligned using a spirit level before installing the appliance. The unit corners must be at right angles, as otherwise the furniture door will not align correctly with the 4 corners of the appliance.

Fitting a door which is heavier than the maximum permitted could damage the hinges.

53