Building in the appliance
Securing the appliance in the niche
^Press the appliance against the housing unit on the hinge side.
^To fix the appliance to the housing unit at the top and bottom, screw the long 4 x 20 mm chip board screws a into the hinges at the top and bottom.
^Loosen screws b on the top and bottom fixing brackets c.
^Press fixing bracket c against the side wall and tighten screws b.
^Attach fixing bracket c to the housing unit side wall with screws d. Drill holes in the housing unit side walls if necessary.
^Break off the protruding end of top cover e, turn the cover around and fit it on top fixing bracket c.
^Fit oblong cover f onto top fixing bracket c.
57
