Miele KF 9757 ID Preparing the appliance, Building in the appliance, With 16 mm thick unit walls

Building in the appliance

Preparing the appliance

^Slide cover strip a into the holder as shown, with the bumps facing downwards. The bumps will fit into keyhole slots b.

^Position the mains electricity cable so that the appliance can be connected easily once installed.

^Secure fixing brackets c (supplied) to the appliance doors by screwing a hexagon screw d into the pre-drilled holes.

(With large furniture doors, attach a third pair of fixing brackets c in the handle region of the doors).

^Push the appliance two-thirds of the way into its niche.

When doing this, make sure that the mains cable does not get trapped.

With 16 mm thick unit walls:

^Clip spacers e onto the top hinges and spacers f onto the bottom hinges.

54