The correct temperature
^Press one of the temperature selector buttons repeatedly until a = appears in the display. Then press the Super freeze button again.
=lights up in the display.
^You can now adjust the temperature in the PerfectFresh zone by pressing the temperature selector buttons. You can choose from settings 1 to 9:
1: lowest temperature,
9: highest temperature.
=5 is the default setting for the PerfectFresh zone. If a setting of = 1 to = 4 is selected, the temperature can fall below 0°C. Food could freeze!
^Press the Super freeze button to save the setting.
^Press the master switch on the right hand side of the control panel to come out of the setting mode.
Otherwise the electronics will revert to normal operation after a couple of minutes.
The new temperature setting for the PerfectFresh zone takes effect gradually.
Temperature display
During normal operation, the temperature displays on the control panel show the temperature in the middle of the refrigerator section and the temperature in the warmest part of the freezer section.
If the temperatures in the appliance are not within the range that the appliance is able to display, bars will flash in the temperature displays.
The temperature displays flash if
–a different temperature is being set,
–the temperature in the appliance has risen by several degrees, indicating that the appliance is warming up too much.
This loss of coldness is no cause for concern in the following circumstances:
–when the door has been left open for a while, e.g. for removing or storing a large amount of food,
–when fresh food is being frozen.
However, if the temperature in the freezer section remains above
19
