Building in the appliance
^Break off the protruding end of bottom cover e. It is no longer required.
^Fit angled cover g onto bottom fixing bracket c.
^Close the appliance doors.
Fitting the furniture doors
^A gap of 8 mm a must be set between the appliance door and the central fixing bracket.
^Push fitting aids b up to the height of the furniture door: the lower edge X of the fitting aids must be at the same height as the upper edge of the furniture door being fitted (see - on the diagram).
^Undo nuts c and take fixing bracket d off together with the fitting aids.
^Using a pencil, lightly mark a line down the centre of the inside of the furniture door.
^Hang fixing bracket d with the fitting aids onto the inside of the furniture door. Align the fixing bracket centrally.
^Attach the fixing bracket securely using at least 6 short 4 x 14 mm chipboard screws b. (On cassette doors only use 4 screws on the edges).
^Pull the fitting aids upwards to remove them f.
^Turn them around and fit them into the middle slots on fixing bracket g for safe keeping.
58
