Building in the appliance
^Open both appliance doors.
^Using a screwdriver, remove cover g from the top corner of the appliance.
^Fit cover h onto fixing bracket i.
^Secure fixing bracket i to the top of the appliance with screws j
(M5 x 15).
^Fit cover k onto fixing bracket l.
^Secure fixing bracket l to the bottom of the appliance with screws m (M5 x 15).
^Carefully remove the protective foil from sealing strip n.
^Apply the sealing strip to the side of the appliance on which the door is opened so that it is flush with the front edge of the appliance.
Fit the sealing strip so that it meets up with the lower edge of top cover h and then cut the sealing strip
2 - 3 mm above bottom fixing bracket l.
^Push the appliance into the niche until covers h and k touch the front edge of the side walls of the housing unit.
55