Alignment & Adjustment

Overview

All the 4100U-S1 cards and modules in the base panel are tested and aligned in the

 

factory before being supplied to the customer. The only field adjustment that may be

 

necessary is to set the battery charger voltage. (Note this has been set and should not

 

need re-adjusting).

 

R341

Battery Charger Voltage

 

Should the battery charger voltage need adjusting, the method is as follows:

 

1.

Run the system with the batteries connected and the door closed for at least 30

 

 

minutes to allow components to "warm up" (the longer the better).

 

2.

Calculate the required no-load battery charging voltage by taking 27.3V for

 

 

20°C and subtracting 0.1V for every 3°C above 20°C, or adding 0.1V for every

 

 

3°C below 20°C.

 

3.

With the system not in Alarm, disconnect the batteries.

 

4.

Measure the voltage at the battery terminals on the SPS and adjust this to the

 

 

voltage calculated in Step 2 by turning pot R341 on the SPS.

 

5.

Re-connect the batteries.

8-2

Page 103 Page 105
Page 104
Image 104
Tyco 4100U-S1 installation manual Alignment & Adjustment
Page 103 Page 105

4100U-S1 specifications

The Tyco 4100U-S1 is a sophisticated and robust fire alarm control panel known for its reliability and advanced features, catering primarily to commercial and industrial applications. This system represents the latest in fire safety technology, providing comprehensive protection for a wide range of environments.

One of the main features of the Tyco 4100U-S1 is its ability to support advanced signaling protocols. This capability allows for seamless communication with a variety of initiating devices and notification appliances, ensuring a rapid response to potential fire incidents. The control panel can accommodate a significant number of devices connected through its extensive loop options, enhancing its flexibility in larger installations.

The Tyco 4100U-S1 employs Intelligent Addressable Technology, which simplifies the installation process and reduces wiring complexity. Each device on the loop can communicate its status without needing additional wiring, making it easier to troubleshoot and maintain. This feature not only enhances the system's efficiency but also helps to minimize installation costs.

Another notable characteristic of the Tyco 4100U-S1 is its user-friendly interface. The panel is designed for ease of use, featuring intuitive controls and a clear display that allows users to monitor the system’s status quickly. The graphical interface provides real-time information about the system’s performance, giving users insight into alarm conditions and system health. This accessibility aids in training personnel and encourages adherence to safety protocols.

The Tyco 4100U-S1 also boasts advanced reporting capabilities, with programmable inputs and outputs that allow for detailed event logging and alarm management. The system can be configured to send notifications via various channels, ensuring that key personnel are alerted immediately in case of an emergency. This proactive approach to fire safety helps organizations mitigate risks and enhance response strategies.

In addition, the Tyco 4100U-S1 integrates well with other building management systems, supporting various communication protocols that facilitate interoperability. This integration capability allows users to create a comprehensive safety network that addresses not only fire protection but also other critical building functions.

Overall, the Tyco 4100U-S1 stands out in the fire alarm control panel market with its combination of advanced technology, intuitive design, and extensive flexibility, making it an ideal choice for organizations seeking robust fire safety solutions. Its features and characteristics ensure that it remains a top contender in enhancing life safety and property protection.
Top Page Image Contents