Tyco 4100U-S1 installation manual SW1 to SW3 settings have no effect on Slave T-GEN 50s

Using T-Gen 50 with 4100U-S1, Continued

T-Gen 50 Settings for NAC Operation

These switch and link settings should be used. These apply to T-GEN 50 software version 1.7.

	Alert to Evacuate
Change-Over Time
SW1		SW2 (T1)	SW3	Setting on T-GEN 50
(T0)			(T2)
OFF		OFF	OFF	0 sec
ON		OFF	OFF	30 sec
OFF		ON	OFF	1 min
ON		ON	OFF	1.5 min
OFF		OFF	ON	3 min
ON		OFF	ON	5 min
OFF		ON	ON	10 min
ON		ON	ON	Alert Only

SW1 to SW3 settings have no effect on Slave T-GEN 50s.

SWITCH	Name	Setting on T-GEN 50
SW4	ALM I/P	OFF (Supervision disabled)
	Supervision
SW5	ALM I/P	OFF (Non-latching)
SW6	Evac Tone	OFF
SW7		OFF for AS 2220 tone
		ON for ISO 8201 + Keywords
SW8	Evac Message	OFF for Evac Message 1 or Field
		Recorded message,
		ON for Evac Message 2 or Keywords
		only in ISO 8201

Link	Name	Setting on T-GEN 50
1	BIAS	Can be FITTED if PA or Background
		Music not required
2	MASTER	FITTED
3	REC EN	Fit to record message.
4	TEST	Fit for test tone during installation
5	SLAVE	NOT FITTED
6	SLAVE / MASTER	MASTER
7	FAULT=	RELAY
	DEF-/RELAY

5-12