Getting Started

Overview

This chapter describes how to turn a basic 4100U-S1 into a network node. This process

 

consists of the following:

 

Step 1.

Mounting media cards to the network interface card (NIC)

 

Step 2.

Mounting the network cards in the panel

 

Step 3.

Wiring between panels

Each step is described in this chapter. Before beginning the installation, review the next few pages for a detailed description of network cards and the media cards that mount onto them.

Introduction to the 4100 Network Interface Card (NIC)

Overview

The Network Interface Card (NIC) is a slave card that uses the standard 4100 serial bus to

 

communicate with the CPU. The NIC connects 4100U-S1 and other panels in a network,

 

providing communication between each panel via fiber or shielded twisted pair cable.

 

The NIC is designed to be connected in a loop or ring arrangement, so that a single cable

 

fault does not cause the entire system to fail. The ring arrangement provides the most

 

secure and fault-tolerant wiring possible.

 

Two types of media boards can be used with the NIC card.

 

• The Fiber-Optic Media Card uses multimode optical fibres to connect network

 

nodes. This can be used for electrically noisy environments or for connecting

 

externally to other buildings.

 

• The Wired Media Card is used in all other types of applications. This uses

 

ordinary screened paired cable to connect network nodes.

 

Up to two media boards can be plugged onto each NIC. The same NIC can use a

 

combination of two types of media boards (for example, a NIC may have a wired media

 

card connected to port 1 and a fiber-optic media card connected to port 2).

 

 

 

Continued on next page

3-4

Page 45 Page 47
Page 46
Image 46
Tyco 4100U-S1 installation manual Getting Started, Introduction to the 4100 Network Interface Card NIC
Page 45 Page 47

4100U-S1 specifications

The Tyco 4100U-S1 is a sophisticated and robust fire alarm control panel known for its reliability and advanced features, catering primarily to commercial and industrial applications. This system represents the latest in fire safety technology, providing comprehensive protection for a wide range of environments.

One of the main features of the Tyco 4100U-S1 is its ability to support advanced signaling protocols. This capability allows for seamless communication with a variety of initiating devices and notification appliances, ensuring a rapid response to potential fire incidents. The control panel can accommodate a significant number of devices connected through its extensive loop options, enhancing its flexibility in larger installations.

The Tyco 4100U-S1 employs Intelligent Addressable Technology, which simplifies the installation process and reduces wiring complexity. Each device on the loop can communicate its status without needing additional wiring, making it easier to troubleshoot and maintain. This feature not only enhances the system's efficiency but also helps to minimize installation costs.

Another notable characteristic of the Tyco 4100U-S1 is its user-friendly interface. The panel is designed for ease of use, featuring intuitive controls and a clear display that allows users to monitor the system’s status quickly. The graphical interface provides real-time information about the system’s performance, giving users insight into alarm conditions and system health. This accessibility aids in training personnel and encourages adherence to safety protocols.

The Tyco 4100U-S1 also boasts advanced reporting capabilities, with programmable inputs and outputs that allow for detailed event logging and alarm management. The system can be configured to send notifications via various channels, ensuring that key personnel are alerted immediately in case of an emergency. This proactive approach to fire safety helps organizations mitigate risks and enhance response strategies.

In addition, the Tyco 4100U-S1 integrates well with other building management systems, supporting various communication protocols that facilitate interoperability. This integration capability allows users to create a comprehensive safety network that addresses not only fire protection but also other critical building functions.

Overall, the Tyco 4100U-S1 stands out in the fire alarm control panel market with its combination of advanced technology, intuitive design, and extensive flexibility, making it an ideal choice for organizations seeking robust fire safety solutions. Its features and characteristics ensure that it remains a top contender in enhancing life safety and property protection.
Top Page Image Contents