Panasonic PV-DV702 Advanced Settings, For manual White Balance adjustment

Advanced Settings

White Balance

Auto White Balance (“AWB”) automatically maintains optimum color balance in most lighting conditions. However, when using Digital Functions, etc., you may get better results by using the manual adjustment.

3, 4, A, B

JOG KEY

1POWER

2AUTO/MANUAL

Mode	Description
	Automatically maintains optimum
AWB	color balance in most lighting
	conditions.
	When the source illumination is a
	halogen lamp.
	When shooting outdoors on a
	sunny day.
	When shooting fluorescent
	light.

*The White Balance setting that

was previously set manually.

Note

•When ZOOM is set to 10X or higher, White Balance cannot be adjusted.

1 Set POWER to CAMERA.

2 Hold down AUTO/MANUAL for more than 0.7 second so that the “MNL” indication appears in the EVF or the LCD monitor.

3 Press JOG KEY repeatedly until “AWB” appears in the EVF or LCD monitor.

4 Rotate JOG KEY to select other modes. (See mode chart at left.)

•Hold down AUTO/MANUAL for more than 0.7 second to cancel the setting.

*For manual White Balance adjustment:

A. Rotate JOG KEY to select “” .

B. Point the Palmcorder at a white object (full-screen) and hold JOG KEY down until “” indication stops flashing.

•If “” indication flashes when the

Palmcorder is turned on, the previous manual White Balance setting is in effect.

In the following cases, the “” indication flashes:

•The flashing indicates that the previously adjusted White Balance setting is still kept. This setting will be kept until White Balance is adjusted again.

•Correct White Balance may not be attainable manually in poor lighting conditions.

28
	Forassistance, pleasecall: 1-800-211-PANA(7262)orsende-mailto:consumerproducts@panasonic.com