Panasonic PV-DV702 operating instructions Verifying the driver Windows 98SE/Me/2000/XP

Transferring Your Images (Windows)

Notes on PHOTOVU/MPEG4 Movie Messenger™ System operation

•For PHOTOVU/MPEG4 Movie Messenger™ System, do not connect the i.LINK and USB terminals to the Palmcorder at the same time.

•Make sure Palmcorder power is not shut off during use as your PC system may become unstable. Therefore, the AC Adaptor should be used as the power source. (Be especially careful when recording in M-CARD or CAMERA mode as the power eventually shuts off automatically if a tape is inserted.)

•For PHOTOVU/MPEG4 Movie Messenger™ System, if the play, stop, fast forward, and rewind functions are operated using the Palmcorder buttons, the image may not be captured properly. Use Palmcorder Operation Buttons displayed on the PC screen.

Verifying the driver (Windows 98SE/Me/2000/XP)

Note

•Verify the driver while Palmcorder is connected to the computer.

PHOTOVU/MPEG4 Movie Messenger™ System (VCR Mode)

[ This screen is an example (Windows 2000) ]

1 Click “Start,” “Settings,” and

“Control Panel.”

2 Double-click on “System”, verify [Panasonic Digital Palmcorder] is displayed in [Universal Serial Bus controllers] of [Device Manager].

Palmcorder USB Device Driver/Web Camera (CAMERA Mode)

[ This screen is an example (Windows 2000) ]

1 Click “Start,” “Settings,” and

“Control Panel.”

2 Double-click on “System”, verify [USB Video Camera for Panasonic Digital Palmcorder] is displayed in [Imaging Device] of [Device Manager].

PC Connection

57