Using the LCD Monitor
The LCD (Liquid Crystal Display) monitor can be used while recording.
180° 
90°
90°
Camera Recording
1 Press
monitor. |
|
2 Swing the LCD monitor fully open |
|
and adjust the viewing angle. |
|
• The LCD monitor will automatically |
|
turn on. |
|
• When the LCD monitor is completely |
|
closed, it will shut off automatically to |
|
save power. |
|
| |
• Adjust the LCD Brightness and/or | Camera |
color of the LCD monitor if necessary. | |
Please refer to “To adjust the LCD/ |
|
EVF BRIGHTNESS or COLOR” |
|
below. |
|
3 Start recording. |
|
|
Note
•Using the LCD monitor will reduce battery operating time.
•Close the LCD monitor completely when not in use.
To adjust the LCD/EVF BRIGHTNESS or COLOR
1, 5
MENU
2, 3, 4
JOG KEY
EVF/LCD
1 Press MENU to display the main menu screen.
2 Rotate JOG KEY to select LCD/EVF SETTING from the main menu screen. (Menu OSD: pp. 110, 112)
3 Press JOG KEY to display the LCD/ EVF SETTING screen.
4 Press JOG KEY to select LCD BRIGHTNESS, LCD COLOR, or EVF BRIGHTNESS, then rotate JOG KEY to adjust.
5 Press MENU twice to exit this mode.
19
