Making ice cubes
Switching the ice cube maker
OFF
If you do not want the appliance to make any ice cubes, the ice cube maker can be switched off independently of the freezer section.
Setting the water inlet time
The size of the ice cubes that are produced depends on the water pressure and the water inlet time that is set.
For instance, if the ice cube maker produces small ice cubes then your water pressure is low. To produce larger ice cubes, the water inlet time must be prolonged:
Switch the ice cube maker on.
Press the ON/OFF button on the ice cube maker until the indicator light goes out.
If the ice cube maker is switched off, the ice cube drawer can be used for freezing and storing food.
Clean the ice cube drawer if the ice cube maker is going to be switched off for an extended period of time!
Touch the button and keep your finger on the button.
Now tap once on the ON/OFF button (WITHOUT releasing the button!).
Keep your finger on the button for another 5 seconds until c is displayed.
Keep tapping the button until e is displayed.
Tap the ON/OFF button to confirm.
Keep tapping the button until e 2 is displayed.
Tap the ON/OFF button again to confirm.
36