Changing the door hinging

￿Push the pin ￿ up and out.

Now the soft-close mechanism and the appliance are no longer connected.

￿Remove the panel ￿.

￿Push the shock absorber arm ￿ as far as possible towards the handle side.

￿Loosen the three screws ￿ on the soft-close mechanism and the spacer.

￿In the middle, pry out the housing with the soft-close mechanism using a flathead screwdriver.

￿Then, pry the housing with the soft-close mechanism out of the retainer from the appliance side.

￿Lay the soft-close mechanism aside.

￿Push out the spacer towards the hinge side.

￿Lay the spacer aside.

Removing the bottom door of the appliance:

￿Close the bottom door of the appliance.

￿Pull the bearing pin ￿ in the middle of the appliance up and out.

￿Carefully lift and remove the bottom door of the appliance and set aside.

￿Pull the cover ￿ off.

￿Unscrew the hinge bracket ￿, rotate it 180°, then screw it onto the opposite side.

￿Turn the plastic cap ￿ 180° and replace it on the hinge bracket ￿ in the middle.

￿Now place the cover ￿ on the other side.

60

Page 60
Image 60
Miele KFN 14943 SDE ED installation instructions Removing the bottom door of the appliance