Miele KFN 14943 SDE ED installation instructions Installing the appliance

Installing the appliance

￿adapter cabinet

￿appliance

￿kitchen cabinet

￿wall

The appliance can be installed in any fitted kitchen. To match the appliance to the height of the fitted kitchen, a suitable adapter cabinet ￿ can be installed over the appliance.

A ventilation gap of at least 2 inches

(50 mm) must be provided between the adapter cabinet and the kitchen wall. The ventilation cross-section below the room ceiling must be at least 46 in2 (300 cm2) so that warm air can escape without obstruction. Otherwise the appliance has to work harder, which results in increased energy consumption.

The ventilation cross-sections must not be blocked or covered in any way.

They also need to be dusted/cleaned on a regular basis.

If installing with standard kitchen cabinets (max. depth 580 mm), the appliance can be set up directly next to the kitchen cabinet. In that case the side of the appliance door would project 34 mm and the middle of the appliance 55 mm beyond the front of the kitchen cabinet. This allows the appliance door to open and close properly.

If the appliance is installed next to a wall ￿, a gap of at least 55 mm is needed on the hinge side between the wall ￿ and the appliance ￿. This allows space for the handle when the door is open.

67