Active charcoal filter
The prompt to change the active charcoal filter will occur approx. every 6 months.
When the display for an active charcoal filter change lights up red, the active charcoal filters must be changed.
Replacing the active charcoal filters
Pull the retainer for the active charcoal filters up and off the shelf.
Remove the two active charcoal filters and insert the new filters into the retainer with the encircling edge down.
Place the retainer in the middle of the rear limit stop of any shelf so that it engages.
To confirm the filter change,
touch the display for an active charcoal filter change for approx. 2 seconds.
The display for an active charcoal filter change goes out and the timer is reset.
Changing the active charcoal filters at a later date
If you do not have any new active charcoal filters, you can order new ones from your Miele dealer. You can change the active charcoal filters at a later date.
If you are bothered by the red active charcoal filter change display, you can turn it off:
touch the display for an active charcoal filter change for approx. 2 seconds.
The active charcoal filter change display goes out.
42
