Miele KFN 14943 SDE ED installation instructions Mounting the top door of the appliance

Changing the door hinging

￿Hang the panel ￿ on the shock absorber arm ￿.

￿Pull the shock absorber arm ￿ towards the hinge bracket and insert the pin ￿ from the top so that the square rests in the recess.

￿Put on the cover ￿ in such a way that it engages.

Take care that the cover ￿ sits correctly to ensure that the door closes properly and the pin is secured.

￿Remove the securing device ￿.

￿Place the panel ￿ onto the soft-close mechanism from above, engaging it at the bottom first and then at the top.

￿Close the bottom door of the appliance.

Mounting the top door of the appliance:

￿Place the top door of the appliance onto the bearing pin ￿ in in the middle of the appliance.

￿ Close the top door of the appliance.

￿Put the hinge bracket ￿ on the opposite side and and fasten it with the screws ￿.

The screw holes may have to be pre-punched or use a power screwdriver.

￿Now place the cover ￿ on the other side.

￿Align the appliance door with the appliance housing via the elongated holes in the bottom hinge bracket . Tighten the screws.

63