Installation
Installation with partition using the "Merging Kit"
The minimum thickness of the partition is 5/8" (16 mm).
If there is a partition with a thickness
from 5/8" (16 mm) to 6 5/16" (160 mm)
between the adjacent appliances, then each appliance should be individually installed within its own niche using the mounting accessories included.
The "Merging Kit" will also be needed.
The "Merging Kit" is available from Miele.
Installation with partition without using the "Merging Kit"
If there is a partition with a thickness of more than 6 5/16" (160 mm) between the adjacent appliances, then each appliance should be individually installed within its own niche using the mounting accessories included (the "Merging Kit" is not necessary).
Side panels
If one side of the appliance is visible, a side panel must be used.
The side panel must be firmly secured to the wall, the floor and the overhead furniture/fixtures before the appliance is placed in the cavity.
The dimensions of the side panel are taken from the opposite wall of the installation space. During installation, ensure that the cavity is square and the measurements are correct.
Adjusting the door opening angle (optional accessory)
Depending on the installation site, it may be necessary to adjust the door opening angle to 90°.
^Open the door.
^Insert the banking pin through the holes and drive in with a hammer.
38
