Installation
Aligning the appliance
^Align the appliance with the surrounding cabinets.
The
–Front: with an
The feet can be adjusted from the top and bottom e.
–Rear: with a 5/16" (8 mm) hex nut driver via flexible shaft f.
A mark is located on the appliance base and is used as a standard gauge for height adjustment. When adjusting the height, align this mark at 1 1/4"
(32 mm) above the floor.
^Unscrew the
reached the indicated guide dimension 1 1/4" (32 mm).
^Check that the appliance is level with the surrounding cabinets.
49
