Woolens, Smoothing, Express Normal, Hand iron | Miele T 7634

		Program Overview


Woolens
Fabrics	Woolens.
Note	– Remove items immediately after the end of the program while still
		slightly damp. Allow items to air dry.
Gentle	Unavailable.
Smoothing
Fabrics	– Cotton or linen fabrics.
	–	Synthetics, cotton or blends. For example: cotton trousers, jackets,
		shirts.
Note	–	Program to reduce creases formed during spin cycle in washer.

–Remove garments immediately the program ends and air-dry

Gentle Unavailable.

Express

Normal, Hand iron

Fabrics

Mixed loads of fabrics for the Normal and Wrinkle-freeprograms.

Dress shirts

Normal, Hand iron

Fabrics	Shirts and blouses.
Gentle	To be selected for delicate fabrics with the care symbol .

Denim / Jeans

Normal, Hand iron

Fabrics	Denim material like trousers, jackets, skirts or shirts.
Gentle	To be selected for delicate fabrics with the care symbol .

17

Image 17

Miele T 7634 operating instructions Woolens, Smoothing, Express Normal, Hand iron, Dress shirts Normal, Hand iron

Contents

Operating Instructions Vented dryer 7634 Disposal of packing material Caring for the environmentDisposing of your old appliance Saving energy Contents Contents Important Safety Instructions Grounding Instructions This dryer is intended for residential use only Accessories Operating the dryer Fault indicator / Optical interfaceControl panel Display Programmable functions DelayProgram duration/ Estimated time remaining Laundry care Care symbolsDrying tips Drying Laundry care Brief instructions Proper dryingPreparing the laundry Turn on the dryer Dryness level selection in programs Extra options/Select DelaySelect program End of program Remove laundry Starting the programBefore the end of a program Delay Options/DelayGentle Buzzer Normal Extra dry, Normal Program OverviewHand iron, Rotary iron Wrinkle-free Extra dry, Normal, Hand iron Smoothing WoolensExpress Normal, Hand iron Dress shirts Normal, Hand iron Timed warm Timed cold Changing the program sequence Switching over from a running programLoading or removing laundry Time remaining Deactivating the lock Electronic lockActivating the lock Cleaning door lint filter Cleaning and careCleaning the lint screen without water Cleaning the lint screen with water Cleaning the dryer Cleaning port-hole grilles What to do, if . . . ? Trouble shootingTest and fault messages Cancelling a Problem Cause SolutionCancelling the fault Light goes on Other faults Items are statically Problem Cause Solution Synthetic-fiber laundryCharged after drying There has been a lint When switched on Start and the indicatorCold programs will not Lights for these programs Replacing the light bulb Program updates Customer serviceWarranty conditions and warranty period Optional accessories Front view Installation and connection Washer-dryer stack Rear view Installation siteCarrying the dryer to the installation site Leveling the dryer Ventilating the installation area Electrical connections Procedure Installing the dryer ventGeneral Avoid Arrangement Left or right dryer vent opening Calculating total duct length Calculation example Rear or side exhaust connectionAt the rear Sideways to left or right Examples are shown on the next Overview of vent systemsFlexible metal duct hose Examples Example Dryer vent systems from metal piping Connecting directly to a wall Side view vent Vent collector duct Washer-dryer stack Technical data Programmable functions for changing Standard values Extending the range of drying levels Programmable functions For programming and saving in memory, follow steps to Adjusting buzzer volumeBuzzer normal default setting Buzzer loud Memory No Memory default settingSet memory function Extending cooldown time Change function of Filter/Vent indication Default setting No Keypad tone default setting Keypad tone on Adjust keypad tone Important condition Changing water conductivity settingDefault setting Lower conductivity setting Alteration rights reserved Nr 323 240