dVent collector duct
To prevent condensed water buildup in
the non-operating dryers:
^For each dryer, install a non-return
flap Rdirectly on the collector duct.
You will need an optional Miele
accessory* (see right) for this.
When installing from 3 to a maximum
of 5 dryers, the pipe diameterDmust
be enlarged.
Number
of
dryers
Pipediameter multiplication
factorfrom Table II
1-2
3
4-5
1
1,25
1,5
1 Connection to connection duct
2 Miele non-return flap*
3 additional Miele Adapter*
4 Vent hose, flexible
^Press the non-return flap(2) fully into
the Adapter (3).
Installing the dryer vent
41