Programmable functions
Change function of Filter/Vent indication
Lint should be removed after drying. At the same time, the Filter/Vent indicator light reminds you to do so as soon as a certain degree of lint has accumulated. You can yourself decide which degree of lint accumulation will trigger that reminder.
Determine by trial and error which of the four options responds to your drying practices.
For programming and saving in memory, follow steps to .
The programmable function is programmed using the buttons.
Precondition:
–The dryer is switched off.
–The door is closed.
Press Start/Stop and keep it pressed it during steps
Press the
Wait until the Start/Stop button lights up continuously . . .
. . . then release the Start/Stop button.
Press the Gentle button four times.
–The Gentle indicator light flashes once slowly.
–P and 2 flash alternatingly in the display (default setting).
The number appearing alternatingly with P means:
0The Filter/Vent indicator is deactivated
IThe Filter/Vent indicator comes on only when there is a heavy lint buildup
(Express control light additionally flashes once)
2default setting
(the Express indicator light also flashes twice)
3The Filter/Vent indicator will come on when there is only a light lint buildup
(The Express indicator light also flashes three times)
Pressing the Start/Stop button switches from one to the other.
Using the
The programming is now stored in memory. You can change it again at any time.
49
