Replacing the light bulb
Disconnect the dryer from the
electrical supply.
^Open the door.
The hinged cover for the lighting is over
the port-hole.
^Gently insert an ordinary tool* under
the side of the cover.
* such as a wide slot-type screwdriver
^Open the cover by pressing lightly
while rotating your wrist.
The cover opens downwards.
The heat-resistant bulb should be
obtained only from Miele customer ser-
vice.
The bulb should be of the same type
and maximum wattage indicated on
the data plate and the lighting cover.
^Replace the bulb.
^Fold the cover upwards and press it
on the right and left until you hear it
latch.
,Ensure that the cover is properly
seated. If moisture gets inside it may
cause a short-circuit.
Trouble shooting
28