Set memory function
The electronics memorizes any
selected program with extra options.
The duration of a Smoothing program
will also be stored in memory.
These settings will be used for the
next drying. They can be accepted,
or changed by using the buttons.
For programming and saving in
memory, follow steps Ato E.
The programmable function is
programmed using the buttons.
Precondition:
– The dryer is switched off.
– The door is closed.
APress Start/Stop and keep it pressed
it during steps B-C.
BPress the I-On/0-Off button in.
Wait until the Start/Stop button lights up
continuously ...
C. . . then release the Start/Stop
button.
DPress the Gentle button twice.
–The Gentle indicator light flashes
briefly six times.
–Pand 0flash alternatingly in the
display (default setting).
The number appearing alternatingly
with Pmeans:
IMemory
(Express indicator light also flashes)
0no Memory
(default setting)
EPressing the Start/Stop button
switches from one to the other.
FUsing the I-On/0-Off button, switch
the dryer off.
The programming is now stored in
memory. You can change it again at
any time.
Programmable functions
47