Installation

Installing the shipping struts

￿ Reinstall the struts by reversing the "Removing the shipping struts" procedure.

￿To avoid injury the holes for the shipping struts must be covered after the struts are removed.

￿Close the holes with the rotary protectors as shown, making sure to close the caps.

￿Fasten the shipping struts to the rear of the washer. Make sure that the catch at the top of the strut is hooked above the holder.

￿Do not move the washer without the shipping struts in place.

44

Page 48
Image 48
Miele W 3037 installation instructions Installing the shipping struts