Milan Technology MIL-SME801GLX manual MAC Filtering, Steps to specify a MAC address to filter

5-4-6-3. MAC Filtering

MAC address filtering allows the switch to drop unwanted traffic. Traffic is filtered based on the destination addresses.

Steps to specify a MAC address to filter:

1. In the MAC Address box, enter the MAC address to filter.

1.If tag-based (802.1Q) VLAN are set up on the switch, in the VLAN ID box, type the VID to associate with the MAC address.

2.Click the Add button.

3.To delete a MAC address, highlight the selection in the table you want to delete and then click the Delete button.

NOTE: Changing the VLAN type in the Advanced Switch Setting menu will cause the contents of this table to clear.

118