Basic
To create a VLAN and add tagged member ports to it:
1.Select the Add button to create a new VLAN.
2.Enter a name for the new VLAN.
3.Enter a VLAN ID (2 to 4094). The default is 1.
4.Choose the protocol type. Default is NONE.
5.From the Available ports box, select ports to add to the switch and click Add. If the trunk groups exist, you can see it here (ex:Trunk1,Trunk2…) and configure it as a member of the VLAN or not.
6.Click the Next button.
Use this page to set the outgoing frames are
125
