4-5-1. Factory Default

Use this menu to restore all factory default settings. Pressing y will reset the switch configuration settings to their factory defaults. Rebooting the switch is necessary for the new configurations to take effect.

y:Resets the switch to the factory default configuration. The software version that the switch will be reset to can be found on the “System Information” menu under the main menu “Status and Counters”.

N: Returns to the previous menu.

Warning: The unit must be allowed to complete restart process to restore the defaults without an interruption. Manually powering off the system before the process has been completed may result in corrupted memory and may cause the unit to not start or come up in an unknown state.

4-5-2. System Reboot

Reboots the switch to enable items that have been configured.

83

Page 89
Image 89
Milan Technology MIL-SME801GSX, MIL-SME801P, MIL-SME801GLX manual Factory Default, System Reboot