USER GUIDE
4.2.6.1 Editing the computer name
In this window you can edit the computer names with up to 15 characters. When you have a cascaded CAT5 KVM Switch connected to a Computer port give the switch a distinct name. See Figure 16.
To erase a character:
Select it and press the Spacebar. Blank spaces remain in place of the erased character. To erase an entire line:
Place the cursor at the beginning of the line. Keep the Spacebar depressed until the line is erased.
4.2.6.2 Keyboard (KB)
By default the Keyboard mode is set to PS, which is suitable for Windows, Linux, MAC OS, SUN Solaris and most other operating systems.
For certain UNIX operating systems set the KB column as follows:
∙U1 for HP UX
∙U2 for Alpha UNIX, SGI, Open VMS
∙U3 for IBM AIX
4.2.6.3 (HKEY) hotkey - Cascading
When there are cascaded switches, and the lower level Switch has had its OSD display hotkey changed, you must do the following:
Adjust the HKEY setting in the Ports Settings window of the higher level switch to reflect the lower level switch’s new hotkey: E.g. in Figure 16 above a Smart CAT5 switch is connected to port #3 and its display hotkey is Ctrl, F11.
To reflect the new hotkey:
1.On the line to which the Switch is connected, press Tab to jump to the HKEY column.
2.Toggle between the options using the Spacebar.
3.Return to the Settings window by pressing Esc.
4.2.7 The Time settings
In the Settings window navigate to the Time line and press Enter. The Time settings window appears see Figure 17.
20
