USER GUIDE
4.2.9 Security | 22 |
4.2.10 The OSD HELP window – F1 | 23 |
4.2.11 Scanning computers– F4 | 24 |
4.2.12 Tuning – F5 | 24 |
4.2.13 Moving the label – F6 | 24 |
4.2.14 Sending monitor emulation information to RoC/RICCs – F10 | 24 |
4.2.14.1 Updating the DDC information | 25 |
5. Using the Control software | 26 |
5.1 Control software system requirements | 26 |
5.2 Connecting the RS232 Serial cable | 26 |
5.3 Installing and running the Control software | 27 |
5.3.1 Selecting a Com port | 27 |
5.3.2 Computer icons | 28 |
5.3.3 Communication Error | 28 |
5.3.4 The View menu | 28 |
5.3.5 Selecting a computer | 29 |
5.3.6 The toolbar buttons | 29 |
5.3.7 Get Status | 29 |
5.3.8 Read Configuration | 29 |
5.3.9 Write Configuration | 29 |
5.3.10 Renaming a computer | 29 |
5.3.11 The Edit menu | 30 |
5.3.12 Logo and Passwords | 30 |
5.3.13 Settings | 30 |
5.3.13.1 Single computer settings | 31 |
5.3.14 Loading a saved configuration | 31 |
5.3.15 Reminder! | 31 |
5.3.16 The factory default settings | 31 |
5.4 Password protection | 32 |
5.4.1 Administrator (Status A) | 32 |
5.4.2 Supervisor (Status S) | 32 |
5.4.3 User (Status U) | 32 |
6. Upgrading the Smart CAT5 firmware | 33 |
6.1 System requirements for the Smart CAT5 Update software | 33 |
6.2 Connecting the Smart CAT5 system | 33 |
6.3 Installing the software | 33 |
6.3.1 Connecting the RS232 Serial cable | 33 |
6.4 Starting and configuring the Smart CAT5 Update | 33 |
6.4.1 Verifying the version numbers | 35 |
6.4.1.1 OSD version number | 35 |
6.4.1.2 Smart CAT5 Manager version number | 35 |
6.4.1.3 RoC/RICC version number | 35 |
6.4.2 Obtaining new firmware | 36 |
6.4.3 Updating the firmware | 36 |
7. Troubleshooting | 38 |
7.1.1 Resetting the units | 38 |
2
