Call Handling, Hold, Transfer | Mitel 5207 specs

CALL HANDLING

Hold

To place a call on Hold:

Press Hold

To retrieve a call from Hold:

1.Lift the handset

2.Press the flashing line key

To retrieve a call from Hold at another station:

Press the flashing line key

-OR-

Dial *78 and the number of the station that placed the call on Hold.

Transfer

To transfer an active call:

1.Press TRANS/CONF

2.Dial the number of the third party

3.Do one of the following:

To complete the Transfer, hang up

To announce the Transfer, wait for an answer, consult, and hang up To cancel the Transfer, press CANCEL

To transfer an active call during a headset operation:

1.Press TRANS/CONF

2.Dial the number of the third party

3.To complete the Transfer, press the Release feature key

MITEL Networks 5207 IP Phone	9	Rev. 012805
User’s Guide		Rev. 012805
User’s Guide

Image 13

Mitel 5207 manual Call Handling, Hold, Transfer

Contents

Mitel Networks 5207 IP Phone Mitel Networks 5207 IP Phone Rev User’s Guide Contents Call Handling About Your Phone Important Note for Headset Users Telephone Status IndicatorsFor Users on Resilient 3300 ICP Systems Don’t cradle the handset Tips for Your Comfort and SafetyProtect your hearing Angle the phone for easier viewing Speaker Volume Control Handset Receiver Volume ControlCustomizing Your Phone Ringer Control To adjust the Display Contrast while your set is idle Feature KeysDisplay Contrast Control Language Change Make a call Making and Answering CallsAnswer a call Redial To dial a stored Speed Call number Speed Call KeysTo store a Speed Call number On-Hook Dialing Speed Call PersonalAuto-Answer Hold Call HandlingTransfer Conference Split ConferenceSwap To leave a Conference To program Call Forward Call ForwardTo turn Call Forward on and off once it has been programmed Call Forward End Chaining Call Forward Remote Messaging Callback Messaging Advisory Account Codes Using Advanced FeaturesCall Park Call Pickup Do Not Disturb Camp-onDirect Paging Headset Operation Handsfree Operation To disable the Headset Operation Headset Operation with Feature Control SwitchTo answer a call To mute the headset microphone To respond to a Group Page by using Meet Me Answer To turn Music on and off when the set is idleMusic Group Paging / Meet Me Answer Hot Desk Remote Logout Hot DeskingTo log into a Hot Desking phone the phone must be idle To log out of a Hot Desking phone the phone must be idle MTU Feature Access Codes for Mitel IP Phones Cancel Call Forwarding End Chaining TM, Trademark of Mitel Networks Corporation