About Your Phone | Mitel 5207 manual

ABOUT YOUR PHONE

The Mitel 5207 IP phone has ten fixed-function keys (SUPERKEY, MESSAGE,

HOLD, CANCEL, TRANS/CONF, REDIAL, SPEAKER, MICROPHONE, ) and 14 personal keys with built-in status indicators. The personal key on the bottom right is always your Prime Line; the remaining personal keys can be programmed as:

Feature keys (for example, Swap). Telcom must program these feature keys to buttons.

Speed Call keys. You can program speed call keys from your phone.

Line Appearances. Only Telcom can program line appearances.

Your telephone also features display-assisted selection of features, on-hook dialing, and a large Message Indicator.

Note: When using the SUPERKEY, press Cancel or SUPERKEY to back up one menu level.

1.	Handset	4.	Message Waiting Indicator	7.	Keypad
2.	Speaker	5.	Fixed-function Keys	8.	Prorammable Feature Keys
3.	Display	6.	Volume Control	9.	Designation Card

MITEL Networks 5207 IP Phone	1	Rev. 012805
User’s Guide		Rev. 012805
User’s Guide

Image 5

Mitel 5207 manual About Your Phone

Contents

Mitel Networks 5207 IP Phone Mitel Networks 5207 IP Phone Rev User’s Guide Contents Call Handling About Your Phone For Users on Resilient 3300 ICP Systems Telephone Status IndicatorsImportant Note for Headset Users Don’t cradle the handset Tips for Your Comfort and SafetyProtect your hearing Angle the phone for easier viewing Speaker Volume Control Handset Receiver Volume ControlCustomizing Your Phone Ringer Control To adjust the Display Contrast while your set is idle Feature KeysDisplay Contrast Control Language Change Make a call Making and Answering CallsAnswer a call Redial To store a Speed Call number Speed Call KeysTo dial a stored Speed Call number Auto-Answer Speed Call PersonalOn-Hook Dialing Transfer Call HandlingHold Conference Split ConferenceSwap To leave a Conference To turn Call Forward on and off once it has been programmed Call ForwardTo program Call Forward Call Forward End Chaining Call Forward Remote Messaging Callback Messaging Advisory Account Codes Using Advanced FeaturesCall Park Call Pickup Direct Paging Camp-onDo Not Disturb Headset Operation Handsfree Operation To disable the Headset Operation Headset Operation with Feature Control SwitchTo answer a call To mute the headset microphone To respond to a Group Page by using Meet Me Answer To turn Music on and off when the set is idleMusic Group Paging / Meet Me Answer Hot Desk Remote Logout Hot DeskingTo log into a Hot Desking phone the phone must be idle To log out of a Hot Desking phone the phone must be idle MTU Feature Access Codes for Mitel IP Phones Cancel Call Forwarding End Chaining TM, Trademark of Mitel Networks Corporation