Important Note for Headset Users:

Mitel Headsets with Feature Control Switch must be installed in the dedicated headset jack (the jack nearest the front of the set). Installation will disable your handset microphone. Disconnecting the headset at the jack or at the quick- disconnect plug restores handset operation.

Telephone Status Indicators

When Line is

The indicator is

Idle

Off

Busy

On

Ringing

Flashing slowly

On hold at your set

Flashing rapidly

On hold at another set

Flashing slow on/fast off

For Users on Resilient 3300 ICP Systems

If during a call, you hear two beeps repeated every 20 seconds, it means that your phone is switching to a secondary 3300 ICP system. The call continues but the keys and features on your phone stop working. They keys and most features begin working again after you hang up. Normal operation resumes when your phone switches back to the primary system. If your phone is idle and switched to the secondary system, you’ll see a flashing rectangle on the display. The rectangle remains until the switch to the primary system is complete.

MITEL Networks 5207 IP Phone

2

Rev. 012805

User’s Guide

 

 

 

Page 6
Image 6
Mitel 5207 manual Important Note for Headset Users, Telephone Status Indicators, For Users on Resilient 3300 ICP Systems