Mitel 5207 manual Headset Operation with Feature Control Switch, To disable the Headset Operation

To disable the Headset Operation:

Press the Headset feature key

Headset Operation (with Feature Control Switch)

IMPORTANT NOTE: Mitel Networks Headsets with Feature Control Switch must be installed in the dedicated headset jack (the jack nearest the front of the set). Installation will disable your handset microphone. Disconnecting the headset at the jack or at the quick-disconnect plug restores handset operation. If handset operation is required for an extended period of time, you should press the Headset feature key to return the telephone to handset mode.

To enable Headset Operation

Press the Headset feature key

To answer a call:

Press the flashing line appearance key -OR-

Quickly press and release the headset’s feature controls switch

To mute the headset microphone:

Press and hold the headset’s feature control switch.

To hang up:

Press CANCEL -OR-

Quickly press and release the headset’s feature control switch

To disable the Headset Operation:

Press the Headset feature key

MITEL Networks 5207 IP Phone	17	Rev. 012805
User’s Guide