Registration and Configuration

Battery Specification

Technology: Nickel-metal-hydride (NiMH)

Size: AAA (Micro, HR03)

Voltage: 1.2 V

Capacity: 400–800 mAh

The following types of battery are recommended:

GP GP55AAAHCR 550mAh

SHP HFR-44AAAJ550 550mAh

SUPPO HSY-AAA0.55-C 550mAh

The handset is supplied with the recommended batteries.

Charging the Handset

It is recommended that you charge the handset battery fully before first use.

1.Charge the battery. It takes approximately 8 hours to fully charge the battery.

2.Then remove the handset for use.

Care of the Handsets

Wipe the charging cradle and the handset with a damp cloth (do not use solvent) or an antistatic cloth. Never use a dry cloth. This can cause static.

If the handset should come into contact with liquid:

Switch the handset off and remove the batteries immediately.

Allow the liquid to drain from the handset.

Pat all parts dry, then place the handset with the battery compartment open and the keypad facing down in a dry, warm place for at least 72 hours (not in a microwave, oven etc.).

Do not switch on the handset again until it is completely dry.

When it has fully dried out, it can be used again.

9

Page 15
Image 15
Mitel 5505 manual Charging the Handset, Care of the Handsets, Battery Specification