Mitel NETVISION PHONE manual Intercom Calling, Adjusting the Volume During a Call, Ending a Call

Intercom Calling

This feature allows you to speak to a group of other NetVision phone users at the same time. Each user can belong to as many as 10 intercom groups. The system administrator manages access to the groups. You can only speak to one intercom group at a time.

The phone automatically answers an intercom call if a call is not already in progress. If a call is progress, a three-beep alert indicates that a call is waiting. The phone enters the intercom call when you end or place the current call on hold.

Any user can leave an intercom call at any time. Only the initiating phone can end an intercom call.

To place an intercom call:

1.Press #.

2.Enter the intercom group number (0-9).

3.Press SND.

4.Speak to the other users in the intercom group.

Adjusting the Volume During a Call

To adjust the earpiece volume for the current call only:

zPress the Vol buttons on the side of the phone.

For information on adjusting the base volume for all calls, see Earpiece Volume elsewhere in this guide.

Ending a Call

To end a call:

zPress END.

NOTE: Holding down the END key for two seconds turns off the phone.

-11-