Mitel NETVISION PHONE manual Making and Answering Calls, Answering a Call, Identifying a Caller

MAKING AND ANSWERING CALLS

Answering a Call

You can program your NetVision Data Phone to answer calls in one of three ways:

zAuto-Answeringautomatically answers the call after one ring.

zOne-Key Answering requires you to press SND to answer a call.

zAny-Key Answering allows you to use any key but END or HOLD to answer a call.

To select an answering mode:

1.Press MENU.

2.Use the scroll keys (*<, >#) or the Vol buttons to select Phone Answer.

3.Select the desired mode.

To cancel your selection, press END.

Identifying a Caller

While in a call, the phone can display either the caller's number or name (if available) but not both at once.

To alternate between the caller's number and name:

zPress NAME.

Refusing a Call

To refuse an incoming call:

zPress END.

NOTE: Holding down the END key for two seconds turns off the phone.

-9-