Viewing video images (continued)
Connecting to a video player, etc.
Video player, or the like
1.Connect one end of the optional video cable to the VIDEO IN terminal of the projector.
2.Connect the other end of the video cable to the video output terminal of the video equipment.
COMPONENT VIDEO IN
VIDEO IN
1 To 
IN terminal
2
To video out- put terminal
1IN terminal Video cable (option)To VIDEO
Video player, or the like
To
2 terminal
When the video equipment is equipped with the
1.Connect one end of the optional
2.Connect the other end of the
COMPONENT VIDEO IN
VIDEO IN
•Also read the instruction manual of the equipment to be connected.
•Contact your dealer for details of connection.
When a TV tuner or VCR is connected:
When you use this projector with a TV tuner or VCR connected, no image may appear or a message of NO SIGNAL may appear on the screen when you change the channel via any channel that is not being received. In such a case, set the channels of the TV tuner or VCR again. To avoid such symptom, use the TV tuner or VCR with its channel skip function (that is a function not to display channels that are not being received) enabled.
Connecting to a DVD player or HDTV decoder
To connect this projector to video equipment that has component video output terminals, such as a DVD player, use the COMPONENT VIDEO IN terminals.
Component cable (option)
Y
PB/CB
PR/CR
HDMI IN
PR/CR PB/CB | Y | SERIAL USB |
| VIDEO IN |
| |
TRIGGER | VIDEO IN |
DVD player or HDTV decoder
•The terminal’s names Y, PB, and PR are given as examples of when a HDTV decoder is connected.
•The terminal’s names vary depending on the connected devices.
•Images may not be projected correctly depending on the type of the DVD player you use.
•Though it may take some time before an image is displayed on the screen depending on the type of the input signal, such symptom is not a malfunction.
•When connecting a HDTV decoder having RGB output terminals, set COMPUTER INPUT to RGB in the SIGNAL menu.
