Mitsubishi HC1100 user manual Specifications, Dimension drawings unit mm, English

Specifications

The specifications and outside appearance of the projector are subject to change without prior notice.

Type		DLP™ projector
Model		HC1100
Display technology		0.62-inch single chip DMD (aspect ratio 16:9)
		Pixel: 1280 x 720 = 921600 pixels
Projection lens		F 2.4 - 2.6 f= 23 - 27.6 mm
Light-source lamp		200 W
Image size (projection distance)		40” min. to 275” max. (projection distance 1.3 to 10 m)
Maximum	Computer signal	Maximum resolution: 1280 x 1024 dots (analog)/compressed
resolution		Panel resolution: 1280 x 720 dots
	Video signal	NTSC/PAL/SECAM/4.43NTSC/PAL-M/PAL-N/PAL-60
	Component	480i, 480p, 576i, 576p, 720p, 1080i
	signal	Panel resolution: 1280 x 720 dots
Computer input		[Signal type]	[Terminal type]	[Line]
		Analog RGB	D-SUB 15P	1
		HDMI	HDMI 19P	1
Video input		[Signal type]	[Terminal type]	[Line]
		Video input	RCA	1
		S-video input	S	1
		Component video input	RCA	1
Control terminal/	SERIAL	RS-232C (8-pin)
others	TRIGGER	DC 12 V, max. 200 mA (stereo mini jack)
Operating temperatures		+41°F (+5°C) to +95°F (+35°C)
Rated voltage		AC100 - 240 V, 50/60 Hz
Power consumption		2.9 A
Dimensions		310 mm (W) x 100 mm (H) x 245 mm (D)		* Not including protrusion.
Weight		2.9 kg
Others	S-video input	Luminance signal: Vp-p=1.0 V 75 Ω (negative sync)
		Chrominance signals: Vp-p=0.286 V 75 Ω (burst signal)
	Video input	Vp-p=1.0 V 75 Ω (negative sync)
	Component video	YCBCR: Vp-p=1.0 V 75Ω (Y) (negative sync)
	input	Vp-p=0.7 V 75 Ω (CB, CR)
	Analog input	RGB: Vp-p=0.7 V 75 Ω (negative sync)
		YCBCR: Vp-p=1.0 V (Y)	(negative sync) Vp-p=0.7 V (CB, CR)
		HD/CS: TTL-level (negative or positive polarity)
		VD: TTL-level (negative or positive polarity)
	Digital input (HDMI)	HDMI interface (TMDS single link)

ENGLISH

Dimension drawings (unit: mm)

61

245

310

5 100

HDMI IN

SERIAL USB

COMPONENT VIDEO IN

TRIGGER

EN-37