Mitsubishi Electronics FC810 manual 66/100Mhz system bus frequency

￿ ￿ ￿ ￿ ￿ ￿ ￿ ￿ ￿ ￿ ￿ ￿ ￿ ￿ ￿ ￿ ￿ ￿ ￿ ￿ ￿ ￿ ￿ ￿ ￿ ￿ ￿ ￿ ￿ ￿ ￿ ￿ ￿ ￿ ￿ ￿ ￿ ￿ ￿ ￿ ￿ ￿ ￿ ￿ ￿ ￿ ￿

￿￿￿￿￿￿￿￿￿￿￿￿

￿￿￿￿￿￿

The FC810 microATX motherboard accepts the following Celeron™ processors operating at a bus speed of 66 or 100MHz.

￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿ ￿￿￿￿￿￿￿￿￿￿￿￿￿ ￿￿￿￿￿￿￿￿￿￿￿

		266	4.0	66
		300	4.5	66
		333	5.0	66
		366	5.5	66
		400	6.0	66
		433	6.5	66
		466	7.0	66
		500	5.0	100
		550	5.5	100
		600	6.0	100
	￿￿￿￿￿￿￿
	The processor core voltages are generated by switched-mode regulators on the motherboard to
	the Intel VRM8.2 specification.
￿￿￿￿￿	￿

The core logic is based around the Intel 810 Graphics and Memory Controller Hub (GMCH) and the I/O Controller￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿Hub (ICH). The features of￿￿￿each ￿￿￿￿￿￿are summarised below.

66/100Mhz system bus frequency

DRAM controller supporting 100Mhz SDRAM main memory 8MB – 256MB and suspend to RAM (PC100)

Integrated graphics controller with 2D/3D H/W acceleration 3D graphics visual/ textural enhancements

Integrated 24-bit 230MHz RAMDAC

￿Integrated graphics memory controller with display cache interface – 100Mhz SDRAM Advanced power management functions - ACPI / APIC

MITSUBISHI ELECTRIC MOTHERBOARD DIVISION PAGE 17 OF 45