￿ ￿ ￿ ￿ ￿ ￿ ￿ ￿ ￿ ￿ ￿ ￿ ￿ ￿ ￿ ￿ ￿ ￿ ￿ ￿ ￿ ￿ ￿ ￿ ￿ ￿ ￿ ￿ ￿ ￿ ￿ ￿ ￿ ￿ ￿ ￿ ￿

￿ ￿ ￿ ￿ ￿ ￿ ￿ ￿ ￿ ￿

￿￿￿￿￿￿￿￿￿

FC810 microATX is a Celeron™ processor-based microATX profile motherboard.

The design of FC810 microATX is based around the following components.

￿Intel Celeron™ processor in Socket 370 Intel 810 Chipset consisting of :-

Graphics and Memory Controller Hub (GMCH)

￿I/O Controller Hub (ICH) Firmware Hub (FWH)

AC’97 audio controller

￿￿￿￿￿￿￿￿￿Intel 82559 IEE802.3 10BASE-T / 100BASE-TX compatible LAN controller

The Celeron™ processor is based on the P6 micro-architecture and includes MMX technology. Two package styles are available – cartridge (slot 1) and pin-grid array (socket 370). FC810

￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿requires the pin-grid array version￿￿￿￿￿￿￿￿￿￿.￿￿￿￿￿￿￿￿￿

The GMCH connects the processor to the main system memory and other system logic. It has an integrated graphics controller with optional 4MB Display Cache. Supports both 66Mhz and

￿￿￿￿￿￿￿￿￿￿￿￿￿100Mhz system bus￿￿￿. ￿￿￿￿￿

The ICH contains a PCI 2.2 interface, a bus master IDE controller - Ultra ATA 33/66 (depending on build option), AC’97 2.1 interface and all the general purpose I/O ports. There are two versions detailed below -

￿ICH0 – ATA33 IDE Channels, 4 PCI Devices

￿￿!"￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿ICH1 – ATA66 IDE Channels, 6 PCI Devices

The AC’97 CODEC is the analogue part of the audio system. It is connected to the ICH by a

#digital$%%!&￿'￿￿￿￿￿￿￿￿￿￿link.

The 82559 is Intel’s second generation integrated 10BASE-T/100BASE-TX LAN solution. It consists of both the Media Access Controller (MAC) and the physical layer (PHY) interface combined into a single component solution. It contains a 32 bit PCI bus master interface

MITSUBISHI ELECTRIC MOTHERBOARD DIVISION

PAGE 8 OF 45

Page 8
Image 8
Mitsubishi Electronics FC810 manual #digital$%%!&link