Mitsubishi Electronics FC810 manual Ram

￿ ￿ ￿ ￿ ￿ ￿ ￿ ￿ ￿ ￿ ￿ ￿ ￿ ￿ ￿ ￿ ￿ ￿ ￿ ￿ ￿ ￿ ￿ ￿ ￿ ￿ ￿ ￿ ￿ ￿ ￿ ￿ ￿ ￿ ￿ ￿ ￿ ￿ ￿ ￿ ￿ ￿ ￿ ￿ ￿ ￿ ￿

￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿

Form factor	microATX, 9.6" wide x 7.8" deep. ATX 2.01 compliant.
Processor	Socket370 with the VRM8.2 regulator on motherboard.
	Accepts 66/100Mhz Celeron™ processors
Core logic	Intel 810
Cache	L2 cache included on processor module.
Memory –	Memory sockets accept 168 pin un-buffered PC100 SDRAM modules.
RAM
Memory -	4Mb Firmware Hub
Flash ROM
Buses	4 PCI bus master slots
VGA	Integrated Graphics controller (82810) with 2D/3D acceleration, 230Mhz
	RAMDAC and optional 4Mb Display Cache (82810-DC100)
Audio –	AC’97 2.1 compliant CODEC (Optional)
controller
Hard Disk &	Dual UltraATA33 interfaces for hard disk and CD-ROM. (UltraATA66
CD-ROM	optional with ICH1 fitted)
Floppy Disk	720kB, 1.2MB (3-mode), 1.44MB 3½ drives, 1.2MB 5¼ drives.
	Support for 120MB drives via ATA port.
Parallel Port	IEEE 1284 (ECP & standard) on 25-way D-type
Serial Ports	Single 16550. One 9-way D-types on rear edge of motherboard.
USB	Two ports.
Ethernet	1x RJ45 port
Keyboard &	PS/2-style connectors.
Mouse
Security	Chassis intrusion detection.
Power	Green and deep green via system management mode.
Management	ACPI compatible.
	Wake-on LAN
	Standby option with wake-up on interrupt, serial port activity or button.
System	Hardware monitoring – Fan monitor (standard), Voltage/ Thermal monitor
Management	(optional - PC87366 I/O)
Plug & Play	PC98 and PC99 compliant
Battery back-	On-board lithium coin cell with 5 years typical life.
up
PCB	4-layer microATX form-factor.
	All components on top side

MITSUBISHI ELECTRIC MOTHERBOARD DIVISION PAGE 9 OF 45