Mitsubishi Electronics WD2000 Specifications, Replacement part Option / Not included in the box

Specifications

The specifications and outside appearance of the projector are subject to change without prior notice.

Type		DLP™ projector
Model		WD2000
Display Technology		0.65-inch Single chip DMD
		Pixel: 1280 x 768 = 983040 pixels
Projection lens		F 2.0 - 2.4 f= 24.5 - 33.1 mm
Light-source lamp		300 W
Image size (Projection distance)		40” min. to 275” max. (Projection distance 1.4 to 10.6 m)
Maximum	Computer signal	Maximum resolution: 1280 x 1024 dots (Analog) / compressed
resolution		Panel resolution: 1280 x 768 dots
	Video signal	NTSC / PAL / SECAM / NTSC 4.43 / PAL-M / PAL-N / PAL-60
	Component	480i, 480p, 576i, 576p, 720p, 1080i
	signal	Panel resolution: 1280 x 768 dots
Computer/Component	video input	[Signal type]	[Terminal type]	[Line]
		Analog RGB	Mini D-SUB 15-pin	1
		Analog RGB	5 BNC	1
		Digital RGB	DVI	1
Video input		[Signal type]	[Terminal type]	[Line]
		Video input	RCA / BNC	1
		S-video input	S / 2 BNC	1
Audio input		[Signal type]	[Terminal type]	[Line]
		RGB/Component	Stereo mini jack (ø3.5)	2
		Video	RCA (L, R)	1
		S-video	RCA (L, R)	1
Monitor output		[Signal type]	[Terminal type]	[Line]
		Analog RGB	Mini D-SUB 15-pin	1
Audio output		[Signal type]	[Terminal type]	[Line]
		RGB/Component	Stereo mini jack (ø3.5)	1
Speaker		3 W Mono Round type ø5 cm x 1
Control terminal / Others		RS-232C (D-SUB 9-pin), USB, LAN (RJ-45), REMOTE IN/OUT
Operating temperatures		+41°F (+5°C) to +104°F (+40°C)
Rated voltage		AC100 - 240 V, 50/60 Hz
Power consumption		4.2 A
Dimensions (Not including protrusion)		430 mm (W) x 166 mm (H) x 330 mm (D) (Projector only)
		430 mm (W) x 166 mm (H) x 425 mm (D) (Including the terminal cover)
Weight		8.5 kg (Projector only), 8.8 kg (Including the terminal cover)
Others	S-video input	Luminance signal: Vp-p=1.0 V 75 Ω (negative sync)
		Chrominance signals: Vp-p=0.286 V 75 Ω (burst signal)
	Video input	Vp-p=1.0 V 75 Ω (negative sync)
	Analog input	RGB: Vp-p=0.7 V 75 Ω (negative sync)
		YCBCR: Vp-p=1.0 V (Y) (negative sync) Vp-p=0.7 V (CB, CR)
		HD/CS: TTL-level (negative or positive polarity)
		VD: TTL-level (negative or positive polarity)
	Digital input (DVI)	DVI-D interface (TMDS single link) with HDCP
	Audio input	350 mVrms, 10 kΩ or more
	DC OUT	5 V 1.5 A (max) (For wireless LAN unit *1)
*1 : Wireless LAN unit isn’t packaged together with the projector.
Replacement part
(Option / Not included in the box)
Spare lamp		(VLT-XD2000LP)

ENGLISH

EN-37