Front projection, ceiling mounting
For ceiling mounting, you need the ceiling mount kit designed for this projector. Ask a specialist for installa- tion. For details, consult your dealer.
•The warranty on this projector does not cover any damage caused by use of any
•When using the projector mounted on the ceiling, set IMAGE REVERSE in the INSTALLATION menu to MIRROR INVERT. See page 23.
•When the projector is mounted on the ceiling, im- ages may appear darker than those projected in the case of tabletop mounting. This isn’t a product malfunction.
•Ask your installation specialist to provide a breaker. When you do not use the projector, be sure to shut down the main power by the breaker.
•Do not install the projector where the exhaust vents are exposed to air emitted by an air conditioning. Such installation may cause a breakdown.
•Do not install the projector near a fire alarm because it emits hot air from its exhaust vents.
Rear projection
Ask a specialist for installation. For details, consult your dealer.
•For rear projection, set IMAGE REVERSE in the INSTALLATION menu to MIRROR. See page 23.
Caution:
•Placing the projector directly on a carpet impairs ventilation by the fans, causing damage or failure. Put a hard board under the projector to facilitate ventilation.
•Place the projector at least 50 cm (or 20 inches) away from the wall to prevent the air inlet grille and the air outlet grilles that emit hot air from being blocked.
•Do not use the projector in the following locations and manners, which may cause fire or electric shock.
•In a dusty or humid place.
•In a sideways or
•Near a heater.
•In an oily, smoky, or damp place such as a kitchen.
•In direct sunlight.
•Where the temperature rises high, such as in a closed car.
•Where the temperature is lower than +41ºF (or +5ºC) or higher than +104ºF (or +40ºC ).
Important:
•We don’t recommend using the projector at an alti- tude of 1500 meters or higher. Use at an altitude of 1500 meters or higher may affect the projector’s life.
LENS SHIFT button
To adjust the positions of the projector and the screen, use LENS SHIFT button.
1.Press the LENS SHIFT button.
2.Press the , , or button to move the image position.
•Every time the button is pressed, the image moves down.
•Every time the button is pressed, the image moves up.
•Every time the button is pressed, the image moves to the right.
•Every time the button is pressed, the image moves to the left.
•When you hold down these buttons for 2 seconds or longer, the displayed image moves fast in the corresponding directions.
•Be careful not to be caught in the opening in the lens while the lens is moving.
ENGLISH
